SwedePro™ Six-Layer Chain Saw Wrap Chaps (23077)

SwedePro™ Six-Layer Chain Saw Wrap Chaps

Size : 32"L , 36"L , 40"L

ข้อมูลเฉพาะ

Brand: SwedePro
MPN: 194036
UPC: 703982125593
UNSPSC: 46181520

คำอธิบาย

SwedePro Six-Layer Chain Saw Wrap Chaps, 36˝L

36˝L

Comfortable, breathable chain saw chaps constructed of water- and oil-resistant nylon over six layers of Engtex™ protective padding. Upon contact with a chain saw chain, the fine filaments of the Engtex fabric are drawn into the saw to obstruct the moving parts chain. An additional 12˝L back flap on the lower leg provides additional protection against thorny thickets and moving saw chain. Machine wash and dry. Meets Leg Protection for Chain saw Operators enforced by OSHA Regulation 1910.266, classified by UL® using ASTM Test Method F1414 in accordance with ASTM Standard F1897.

Warning: No one can guarantee that an injury will not occur or will be less severe because an operator wears this protective garment. It is not intended to substitute for good safety procedures in chain saw use. This garment is intended to, under limited conditions, assist the wearer in reducing the severity of injury from a running, gasoline powered chain saw which accidentally contacts the saw operator’s leg. Even with this garment, severe personal injury can result from contact with the rotating chain. This garment contains pads of cut-retardant material designed to reduce the risk of severity of injury to the body parts covered by the pads. In some contacts, the protective pads in this garment may resist the cutting process only for a fraction of a second. The actual degree of protection afforded will vary with the speed of the chain, the time and the angle of the contact, the power and torque of the saw, the design of the chain saw sprocket and similar factors. Follow all manufacturer’s instructions with regard to the use and care of this garment. Failure to follow the manufacturer’s instructions may result in the garment no longer having the capability of providing the minimum protection set forth by ASTM Standard F1897.
This garment is NOT designed for use with electric chain saws due to their continuous high torque.